Supply boards and Regulators

Posted by Valery Zaichenko on

We are pleased to announce a selection of the power supply boards is available for ordering now.

All the supply boards are equipped with SS relay rails control, intended for use with our microprocessor-based Amp Control Boards.

 

Compact Supply board is designed for relatively compact builds, the ideal fit for VHex+ series of amplifiers, rated at 100W of output power per channel. 

We recommend using 2 x supply boards of this kind for a stereo amplifier.

Compact Supply board TopCompact Supply board Bottom
Compact Supply board (top and bottom views)

 

Dual Board Supply boards set is designed for a wide range of amplifiers - it is suitable for uncompromised builds of VHex+ amplifiers, NS Modular amplifiers, as well as TRIBUTE-3000 amplifier (roughly 100W-200W output power range). The boards are plugged into each other via the connectors at the bottom side of the boards.

We recommend using 2 x supply board sets of this kind for a stereo amplifier.

Dual Board Supply boards setDual Board Supply boards set
Dual Board Supply boards set (top of the input board and bottom of the output board views)

 

NS Modular Supply board is designed for the high-power builds of NS Modular series of amplifiers, including NS OPS Double Power. It accepts larger 5 lead caps as well as 10lc x 35mm caps allowing for huge total capacitance values for its size.

We recommend using 2 x supply boards of this kind for a stereo amplifier.

NS Modular Supply boardNS Modular Supply board
NS Modular Supply board (
top and bottom views)

 

NS Modular Inputs Supply board is a set of regulators (+/-15V DC and +/-Rails DC) designed for supplying the Input boards of NS Modular Family amplifiers with regulated power.

The board is arranged for a stereo build. In case of a monoblock build, a half of the board may be populated.

NS Modular Supply board 
NS Modular Inputs Supply board (top view)

 

Let us know should you have any questions on the boards' combination for particular build or anything else you'd like to know about our amplifiers.

Have a nice build! ;)

0 comments

Leave a comment

Please note, comments must be approved before they are published