Simpelstark AX2 bundle #2 (2 x Amp boards + 2 x PSU boards + Amp Control 6 V2.3 boards set)

Regular price $92.90

This is the bundle including the bare boards for Simpelstark AX2 amplifier and Compact PSU, 2 boards each (dual mono configuration for the lowest noise and crosstalk), plus our latest Amp Control System 6 V2.3 boards set.

Simpelstark amplifier opens our Delicate Sound amplifiers family.

A specialty of this design is high linearity of every stage and low amount of global negative feedback - only 18db of ODNF error correction. The amp is particularly good for acoustic music - jazz, classics, guitars, vocals, drums, cymbals, etc.

The amplifier is dead silent at idle, which is a big advantage for listening at the low volumes and/or with some high-sensitivity speakers.

If you order the boards we provide all necessary documentation and of course - our support for the build.

Key specifications with +/-50V rails:

  • Maximum output power: 100W @ 8 ohm; 160W @ 4 ohm
  • Voltage gain 29db
  • Input impedance 47 Kohm
  • THD: 1KHz - 0.007%, 10KHz - 0.05%, 20KHz - 0.07% (measured at 50W @ 8 ohm)
  • IMD: 14+15KHz - 0.007% (measured at 50W @ 8 ohm)
  • SNR: 117db

The board dimensions: 180 x 100 mm

Unregulated PSU board with SS relays on the rails (controlled by the Amp Control Board 6 V2.3).

Dimensions: 100 x 100 mm.

Amp Control boards set 6 V2.3 includes the following PCBs:

  • 1 x Amp Control board 6 V2.3 PCB
  • 2 x DC Offset Detect module PCBs (SMD or TH)
  • 2 x Temperature Sensing module PCBs

Amp Control V6.2.2 is a microprocessor controlled monitoring board that will shut down the amplifier, sending a signal to disconnect the speakers on any sign of a problem from the amplifier it is connected to.

More info on the Amp Control system is available on the product page here:
Amp Control System 6 V2.3 Boards Bundle (5 PCBs)

Please select SMD or TH board variant with appropriate binding post option.